Home  /  News

Maintenance Points For Ice Machine Products 2

May. 22, 2019

As an Industrial Flake Ice Machine Supplier, we continue to share with you the maintenance points of our ice machine products.

Second, to be placed smoothly and leave blank

In order to make the ice machine work better, make sure that the ground is flat and there is no skew at the time of placement. At the same time, we suggest that the anchor screw at the bottom of the machine can be adjusted to adjust the horizontal state so that it can be operated. There will be no noise when it is. Moreover, the ice machine manufacturer emphasizes that it should be left blank. It is not allowed to place any other objects directly on the wall or around it, and the surrounding space should be more than 15 cm.

Industrial Flake Ice Machine

Third, we must do a good job of cleaning and maintenance

Every two months, the head of the water inlet hose of the machine must be twisted open, and the water valve screen inside the machine must be cleaned. This can well prevent the sediment impurities contained in the water from blocking the water inlet. Although the matter itself can clean the remaining water and clean it, after a long time, it should be thoroughly cleaned and disinfected. Also, if you do not need to use the Industrial Flake Ice Machine for a long time, you should also clean it and use a hair dryer to dry the ice film and the moisture in the box, and store it in a relatively dry and ventilated place.