Home  /  News

Precautions for the Installation of the Ice Machine

Jul. 25, 2019

Many companies need to use ice in the process of production and transportation of goods, so it is necessary to purchase a suitable ice machine from the ice machine manufacturer, but even if it is a high-quality ice machine if it is not installed properly affect the effect of ice making. Here is the China Ice Machine Manufacturer to introduce what should be noted when installing the ice machine.

1. Keep away from heat and avoid direct sunlight

Ice can be produced at a low temperature to a certain extent. If the outside temperature is too high, it will affect the production of ice, and it will cause the ice machine to be damaged due to poor heat dissipation. Therefore, the ice machine of the manufacturer of the ice machine is used. It should be noted that it is farther away from various heat sources, and it should be well ventilated to avoid the ambient temperature exceeding 40 degrees Celsius.

2. The installation platform should be stable and strong

After 5 Ton Flake Ice Machine is purchased, it should be installed on a stable and sturdy platform. Because the ice machine has a large weight, it cannot support the ice machine for a long time if the platform is not strong. In addition, if the platform is unstable, the ice machine will not only have a lot of noise during operation but also may not dehydrate.

5 Ton Flake Ice Machine

3. Need to use a separate standard power supply

Due to the relatively high power of the ice machine, China Ice Maker Factory recommends that the company configure the ice machine with a separate power source that complies with national standards during installation, avoiding the use of a power source with other equipment. In addition, in order to avoid the failure of the power supply, the ice machine should be faulty. It should also be configured with fuses and leakage protection switches to ensure that the voltage fluctuation of the ice machine does not exceed 10% of the rated voltage.

In order to obtain good quality ice cubes, in addition to purchasing the 3 Ton Flake Ice Machine, you need to pay attention to all aspects of the installation, including choosing a location away from the heat source, a stable installation platform, and Use a separate standard power supply. Ensure that the ice machine provided by the block ice machine manufacturer can operate stably and make ice for a long time.